New AnnexToolKit 1.1 including release 1.48.22

Here you'll find the updated available
Post Reply
TRS80_MKI
Posts: 3
Joined: Sun Apr 18, 2021 3:38 pm
Has thanked: 2 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by TRS80_MKI »

Hi ,
according some forum .. problems are coming from the quality of usb-c cable/uart-usb ...
Solution --> lowering the baud rate .
I lower it at 115200 and flashing the firmware worked .

i use a pico mqtt broker (picoMQTT) installed in another esp32 .
With arduino pub/sub from other esp32 work perfectly .
In this case i can use it instead ESPNOW ...

i gonna try it with RDS Basic .
Is it possible to add the picoMQTT in the project as an option like BLE , during the flashing ?

Thanks for this nice project ...

@+
TRS80/MKI
User avatar
cicciocb
Site Admin
Posts: 2194
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 470 times
Been thanked: 1461 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

There is already the support for the MQTT actually, only client side.
[Local Link Removed for Guests]
Giuseppe
Posts: 14
Joined: Sun Jul 11, 2021 9:56 am
Been thanked: 4 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by Giuseppe »

Hi I tried to download the whole package but it gives me Google drive : Sorry. You can't access this item because it violates our Terms of Service. How to solve this problem ? Thank you
User avatar
cicciocb
Site Admin
Posts: 2194
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 470 times
Been thanked: 1461 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Jul 13, 2023 8:31 am Hi I tried to download the whole package but it gives me Google drive : Sorry. You can't access this item because it violates our Terms of Service. How to solve this problem ? Thank you
Sorry for that but google decides alone when change the rules. I'll try to upload elsewhere.
m1zar00
Posts: 9
Joined: Thu Apr 22, 2021 5:27 pm
Has thanked: 9 times
Been thanked: 2 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by m1zar00 »

Hi, Seems like the download link isn't working again.... Thanks.
User avatar
cicciocb
Site Admin
Posts: 2194
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 470 times
Been thanked: 1461 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Jul 13, 2023 8:31 am Hi I tried to download the whole package but it gives me Google drive : Sorry. You can't access this item because it violates our Terms of Service. How to solve this problem ? Thank you
Hi,
Try this link
[Local Link Removed for Guests]
Giuseppe
Posts: 14
Joined: Sun Jul 11, 2021 9:56 am
Been thanked: 4 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by Giuseppe »

Grazie Cicciocb il link funziona
dougr
Posts: 1
Joined: Mon Jul 24, 2023 2:33 pm

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by dougr »

The "updated link" at the top of this stream produces the following message from Google Drive: "...Google Drive ... We're sorry. You can't access this item because it is in violation of our Terms of Service..." even though I am logged into the forum. The "Alternative link" *does* work and fetches "annextoolkit_release-1.1.tar.gz". I know how to unpack a tar ball within Windows 10 but is this a Windows version? I am brand new to this forum and I have yet to learn about Annex. How do install the v1.48 over the 1.42 install?
User avatar
cicciocb
Site Admin
Posts: 2194
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 470 times
Been thanked: 1461 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Mon Jul 24, 2023 6:39 pm The "updated link" at the top of this stream produces the following message from Google Drive: "...Google Drive ... We're sorry. You can't access this item because it is in violation of our Terms of Service..." even though I am logged into the forum. The "Alternative link" *does* work and fetches "annextoolkit_release-1.1.tar.gz". I know how to unpack a tar ball within Windows 10 but is this a Windows version? I am brand new to this forum and I have yet to learn about Annex. How do install the v1.48 over the 1.42 install?
Hi, yes the package is for windows and linux.
It is in .tar.gz format because this format hold the file attributes required for linux.
To open on windows, you can use 7zip; simply extract in any folder and double click on win.bat
Post Reply