Strange file request on serial port Annex32 CAN 1.70.5 LFS

[waldli]

Hello Francesco, I updated my ESP32-2432S028 with Annex32 CAN 1.70.4 LFS
and noticed that the serial port constantly displays:

File requested /onvif/device_service
File Not Found
.
After that I flashed the Annex32 CAN 1.70.5 LFS
and it continues to show the strange behavior.

Here is a reboot of the system:

ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:1184
load:0x40078000,len:13160
load:0x40080400,len:3036
entry 0x400805e4
Annex initializing...
module Type 151 Display 105 SD_Card 1
display res 240 320 orientation 1
OK
SD Card Found Freq 26666666
SD Card Type: SDSC
SD Card Size: 480MB

Annex32 CAN 1.70.5 LFS
(C) ciccioCB 2024
Personal use only, commercial use strictly prohibited

Chip revision 3 Freq 240
Number of program lines:80
Basic File Loaded: /default.bas
Program Running
STARTING
Connecting to Xxxxxx

Connected to Xxxxxx
IP address: 192.168.178.192
file requested /onvif/device_service
File Not Found
ws[/ws][1][2] connect
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found
file requested /onvif/device_service
File Not Found

What could this be about?

[cicciocb]

Apparently you have a video service running on your network, probably on your PC.

Just search for "/onvif/device_service" on google

The source is not Annex

edit :
and is not a bug

[waldli]

I didn't think of that. Perpetrator eliminated

Thanks.

Waldemar