Module ESP32-2432S integrated with Annex

Here you'll find the updated available
Post Reply
botman
Posts: 88
Joined: Thu Apr 01, 2021 3:04 pm
Has thanked: 10 times
Been thanked: 39 times

Re: Module ESP32-2432S integrated with Annex

Post by botman »

As a follow-up to our discussion of the ESP32-3248S035R CYD relative that has a 3.5 inch TFT, yesterday, I reconnected the SPI clock, MISO, and MOSI lines for the SD card from the separate connections on the ESP32 in parallel with the corresponding TFT and touch SPI connections to the ESP32. With this change, Annex32 properly uses the SD card with the appropriate SD chip select pin setting in configuration advanced settings. The 10000 Ohm pullup resistor on the SD MISO had to be disconnected to make it work.
Top
eddge1
Posts: 2
Joined: Mon Feb 06, 2023 2:14 am

Re: Module ESP32-2432S integrated with Annex

Post by eddge1 »

Hello,

is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.

TIA
Top
botman
Posts: 88
Joined: Thu Apr 01, 2021 3:04 pm
Has thanked: 10 times
Been thanked: 39 times

Re: Module ESP32-2432S integrated with Annex

Post by botman »

I used a ESP32-3248S035R CYD relative that has a 3.5 inch TFT resistive touch screen to upgrade the electronics in my BrownDog robot. It also uses an ESP32cam board mounted in the nose. Both are running Annex RDS.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
cicciocb
Site Admin
Posts: 2055
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 439 times
Been thanked: 1354 times
Contact:
Contact cicciocb

Re: Module ESP32-2432S integrated with Annex

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Wed Feb 21, 2024 5:27 pm I used a ESP32-3248S035R CYD relative that has a 3.5 inch TFT resistive touch screen to upgrade the electronics in my BrownDog robot. It also uses an ESP32cam board mounted in the nose. Both are running Annex RDS.
Very nice project, I'm happy to see what can be done with Annex RDS.

Thanks
Top
User avatar
cicciocb
Site Admin
Posts: 2055
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 439 times
Been thanked: 1354 times
Contact:
Contact cicciocb

Re: Module ESP32-2432S integrated with Annex

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sat Feb 17, 2024 8:57 pm Hello,

is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.

TIA
Not yet.
Top
eddge1
Posts: 2
Joined: Mon Feb 06, 2023 2:14 am

Re: Module ESP32-2432S integrated with Annex

Post by eddge1 »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Fri Feb 23, 2024 1:49 pm
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sat Feb 17, 2024 8:57 pm Hello,

is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.

TIA
Not yet.
Thank you for the response.
Top
User avatar
cicciocb
Site Admin
Posts: 2055
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 439 times
Been thanked: 1354 times
Contact:
Contact cicciocb

Re: Module ESP32-2432S integrated with Annex

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Wed Feb 28, 2024 1:36 pm
Hello,

is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.

TIA
I've just updated a version 1.52.6 for the ESP32 including the BLE.
Hoping this will work for you :idea:
Top
Post Reply

Return to “Software Updates”